Cleaning Commercial Fire Damage in Bel Air
SERVPRO’s Fire Damage Restoration Cleaning Methods
Restoring property in a Bel Air business is usually cheaper than the cost to replace it. Many insurance companies prefer to pay for restoration, and often require an inspection and an attempt to clean the item before agreeing to write it off and writing a check for replacement.
Consideration must be given to restoration of commercial fire damage to your Bel Air business whenever it may be an option. SERVPRO has extensive experience in Southern California using multiple cleaning methods. Each one is an option when it comes to remediating the effects fire has on furniture stores and other shops in our area.
Dry cleaning is our initial method, and we can use it on nearly every surface. For light-to-medium, non-greasy residues, we can use dusting cloths or dry sponges to wipe off dry particles from surfaces. For heavier residues and light debris, we may bring in specially designed vacuums to remove most of it.
Wet cleaning is the method we begin with for moderate-to-heavy smoke and soot residues. We can remove them by saturating the contaminated surface with water and allowing it to soak for a short time before removing residues with a sponge. If the residue is very heavy, we can still remove it using one of our cleaning agents mixed with water to break up the residue before wiping or vacuuming.
Spray and wipe is a method that uses a spray bottle to apply a mix of water and cleaning agent directly. SERVPRO technicians prefer using it on fabrics that are at risk for color running since it gives them more control of how much product they use on each spot of residue.
Foam cleaning is similar to spray and wipe, but it uses less moisture than spray and wipe method. Our IICRC certified technicians can use either a pump-up sprayer or agitate the mix of water and cleaning agent in a bucket by hand. We lightly spray or dip a sponge into the foam and then work it into the material. For very heavy residues, we can remove them using a soft, upholstery brush to remove residue that already worked itself into the material.
We use abrasive cleaning methods on the rocks used for outdoor patios and some marble surfaces in the kitchen. When possible, we try to use scrubbing pads with a cleaning agent, but it is necessary on occasion to use steel wool or a stiff brush to remove very thick residues.
Immersion cleaning is our method of last resort in most cases. We soak items with heavy residue in a tank of cleaning agent and then use sound waves to agitate millions of bubbles that scrub surfaces very efficiently. It is especially useful for items like Venetian blinds.
Restoring your business is not a quick task, but SERVPRO of Bel Air / West Hollywood has decades of experience to help you reopen as fast as possible. If you have fire damage and need our help to remove it; call (310) 572-6132 today to get started.
Click here for more information on Bel Air.